What's new on Celette AI Webtools

Easier-to-read text across Webtools

Text in Webtools is now dark grey instead of red, which makes pages, tables and forms easier to read. Icons, buttons and highlights keep the Celette red.

Better point placement on vehicle sketches

Point labels no longer spread too far apart on small sketches, and side-view sketches in Eagle and Naja reports are now scaled correctly when the reference points are close together.

Discover page available in all languages

The Discover page (app.celette.com/discover) is now translated into all Webtools languages.

3D Tracking Gauge: fewer readings and prefilled pointers

The 3D Tracking Gauge needs fewer readings and prefills the pointers.

• Pointer lengths are now prefilled for each new pair of points.
• X/Y measurements need only 3 references and fewer readings per target.
• The counter shows the reading number out of the total.
• A reading entered by voice or Bluetooth is no longer recorded twice.

New Discover page with live demos

The new Discover page (app.celette.com/discover) lets anyone search the Celette datasheet database, preview vehicle sketches and try the apps in demo mode, including the dynamic setup sheets for Spanesi, Car Bench and Globaljig benches. Distributors can share it with prospects.

Cameleon: better front jigs and side jigs on trucks

Cameleon gets better front jigs and side jigs on trucks.

• Cameleon now places a normal jig first on the upper front points of trucks and uses the front jigs gantry only when no normal jig fits.
• The Use front jig button still switches to the gantry.
• The gantry follows a change of front crossmembers.
• A side-jig point that cannot be paired can now be held on its own.

3D Tracking Gauge: more precise Z and a choice of measure

3D Tracking Gauge measurements are now more precise in Z, thanks to compensation of the car's attitude. Choose between simple distances, X/Y measurements or X/Y/Z measurements, and each reading shows the mode actually used.

Eagle and Naja connection software updates

CeletteConnect 1.7.2 and measuring head software RC-1.3.9.7 renew the certificates Eagle uses to connect, which reached their expiry date in mid-October, and NajaConnect 0.31 is available for Naja. Install the updates when Eagle or Naja asks for them.

Tutorial videos now on Celette Academy

Tutorial video links on the dashboard and in the apps now open on Celette Academy.

Refreshed AI photo search

AI photo search results now show the same details as quick search results. It is also more accurate, thanks to a newer vision model that identifies the vehicle, and the upload stays usable while you wait for the photo from your phone.

Cameleon: front jigs for Peterbilt, Hino and Fuso trucks

Peterbilt, Hino and Fuso trucks now get front jigs in Cameleon, like other truck makes.

Cameleon: ruler numbers on the side-jig crossmember

The side-jig crossmember in the 3D view now carries the same printed ruler numbers as the real part.

• You can read the position given in the PDF directly on it.
• Tower positions under the crossmember were also corrected.
• The jig selection panel no longer overflows on large screens.

Voice control in the 2D views

In the Tram Gauge, open and close the 2D views, dictate values, hear the expected value and highlight the point by voice, with both hands on the gauge.

Truck cab silhouette for trucks

Trucks such as Scania and Renault Trucks now show a truck cab silhouette in the points selector and in the PDF report.

Subscribe to the Webtools newsletter

Subscribe from the dashboard or when accepting the terms and conditions to receive a monthly email about new Webtools features and datasheets.

Cameleon: approved jig positions now apply in crash modes

Jig positions approved by the Celette team now also apply in the REAR CRASH and FRONT CRASH modes, each half using the layout of its own mode.

Vehicle sketches and silhouettes show again

Since early September, vehicle sketches were replaced by a default sedan in the Cameleon points selector and in reports; the right sketches are back. Vehicle silhouettes also load again in quick search and in the datasheet preview.

Naja: bench setup video and documentation

The Naja tutorial menu now starts with the Setup on CELETTE bench video and has a Documentation section with the user manual and requirements PDFs, which open in a new tab.

Cameleon: correct UM39.5 tip for the Naja M40 socket

For the Naja M40 socket, Cameleon now picks the UM39.5 tip instead of UM40, including in saved setups.

Slide the 2D View tab out of the way

The 2D View tab on the right edge of the apps can now be hidden with one click and brought back just as easily. Webtools remembers your choice.

Eagle: browser-by-browser guide for the local network permission

If your browser does not ask for the permission on its own, Eagle now shows the exact settings steps for your browser (Chrome, Edge or Firefox) to allow the connection to the measuring head, even while the head is switched off.

Add or change your distributor code at any time

You can now enter a distributor or referral code, or change it, from menu > Collision center > Billing information, not only at checkout.

Vehicles missing from search can be found again

Some vehicles could not be found in quick search because of extra spaces or capital-letter differences in their names, for example some Renault Master versions. They now show up again with their datasheets.

Ask for the expected distance between two points by voice

In the Tram Gauge and the 3D Tracking Gauge, ask the AI voice assistant for the expected distance between two points and hear the answer with both hands on the gauge.

Naja distances use the measured positions

Distances you draw between two points in Naja now use the measured positions.

• The PDF report, the Distances tab and the 3D labels show the real distance instead of the datasheet value.
• Since 14 September the PDF report no longer lists the raw X/Y/Z coordinates of custom points.
• Custom points are still drawn on the top and side views.

Enter a separate billing address when you sign up

The welcome window shown after sign-up now lets you enter a billing address different from your bodyshop address.

Reminders before your access ends

A banner now warns you when your subscription is about to be cancelled or expire, with a direct link to renew. During a free trial without a saved card, a reminder asks you to add one before the trial ends so your access continues.

Eagle: fixed reconnections that reset the encoder zero

On some computers Eagle kept reconnecting to the measuring head every few seconds, which erased the encoder zero. The connection now stays up.

Faster loading when a picture is missing

Apps now load faster when a vehicle picture or another file is missing.

New subscription plans, free trials and single datasheets

One subscription now covers Cameleon, Eagle and Naja.

• Choose Celette Standard for everyday collision repair, or Celette Intelligence, which adds certified QR reports and the AI features.
• Compare plans and see your subscriptions and trials in menu > Collision center > Subscriptions.
• Registering eligible new Celette equipment in menu > Collision center > Equipment starts a free trial; Tram Gauge subscriptions start with one too.
• You can add an extra Eagle or Naja to your subscription.
• The Car Bench Compatible, Spanesi Compatible, Globaljig Compatible and Adapter apps let you buy a single datasheet after a preview.
• Every purchase screen has a field for your distributor's code.
• Distributors follow their referred customers and commissions in menu > Distributor center > My referrals, where resellers can also create customers and subscriptions.
• You now get an email notice before any price change on your subscription.

More of Webtools translated

Screens and emails that were still in English are now translated in every language.

Eagle checks for updates once a day

Eagle now looks for CeletteConnect and head updates once a day instead of every time the app restarts. Use Check for update now in the measurement settings to check at any time.

2D View now available in every app

The 2D View tab now appears in every app when a vehicle has 2D dimension drawings, not only in the Tram Gauge.

• It is available in Cameleon, Eagle, Naja, the 3D Tracking Gauge and the compatible apps.
• The values you enter there go into the PDF report.
• The report now shows direction arrows on the measurements.
• Fixed: some vehicles showed the 2D drawings of a different model (for example a BMW X6 drawing on a DAF truck).

Eagle warns you before the head battery runs out

Eagle now warns you when the measuring head battery gets low, and stops you with an alert before it dies in the middle of a measurement.

Eagle helps you allow the browser's local network permission

Eagle helps you allow the browser's local network permission.

• Recent Chrome, Edge and Firefox versions ask for your permission before a web page can talk to equipment in your workshop.
• Eagle now explains this and walks you through allowing it step by step.
• It no longer reports CeletteConnect as not installed in this case.
• Install CeletteConnect 1.7.1 when Eagle asks for it.

Faster on slow connections

Webtools now compresses the data it sends to your browser, so heavy lists such as your saved Naja sessions open much faster on a slow workshop connection.

Naja: clearer list of saved sessions

When you load a saved Naja session, the list now shows how many points were measured and a coloured dot for the leveling quality. The option to measure by symmetry without a datasheet now only appears when the search finds no datasheet.

Eagle: laser threshold setting and head diagnostics

Eagle gets a laser threshold setting and head diagnostics.

• In the Eagle options you can now adjust the target laser detection threshold, or let Auto-adjust set it, when targets miss the laser or flash under bright light.
• If the head does not connect, the top bar now tells you why instead of showing an endless loading bar.
• The options show the head firmware version.
• You can download the head logs for support.
• Install CeletteConnect 1.7.0 and the head update when Eagle asks for them.

Naja: measure custom points and link them

Switch the capture mode to Custom in the top bar to record points that are not in the datasheet (C1, C2 and so on). Link two points to measure the distance between them, or two custom points to check their symmetry; custom points are drawn in the PDF report.

Clearer loading screens in all apps

Cameleon, Eagle, Naja, the Tram Gauge and the compatible apps now show what they are loading, and no longer open on a half-loaded 3D scene.

Webtools loads faster

Webtools now downloads only the language and the 3D tools each page needs, and keeps the app files on your computer between visits, so the dashboard and the apps open faster.

Naja no longer shows false 'Internet connection lost' messages

Naja only warns about a lost internet connection when the connection is really down, not after a single slow answer from the server.

Login page opens your dashboard when you are signed in

If you are already signed in, opening the login page now takes you straight to your dashboard instead of asking you to log in again.

Eagle no longer suggests oblong holes for the head

Oblong holes are no longer proposed as mounting points for the Eagle measuring head, because the head can slide along them. They can still be measured as target points.

Webtools updates no longer interrupt your work

Webtools is now updated without going offline, and a page you had open during an update keeps working instead of breaking.

Naja shows the flex compensation status on body-on-frame vehicles

Naja shows the flex compensation status on body-on-frame vehicles.

• The Naja footer tells you whether flex compensation is applied or which overhang still needs measured points; click it for the details.
• Points with in-plane damage are left out of the correction.
• The report no longer shows an unnecessary warning when no correction is needed.

Better Japanese translation

Many Japanese texts were corrected following feedback from Japanese users, and missing translations were added in the other languages.

CeletteConnect 1.6.2 and NajaConnect 0.30 updates

CeletteConnect 1.6.2 renews the certificate Eagle uses to connect to Webtools, and NajaConnect 0.30 is available for Naja. Install them when Eagle or Naja asks for it.

Alight & Prima co-branding

Accounts that joined through Alight now see the new Alight & Prima name and logos across Webtools, in every language. A refreshed banner with the Celette emblem followed on 29 July.

Eagle: CeletteConnect 1.6.1 and measuring head update

Eagle now expects CeletteConnect 1.6.1 and measuring head software RC-1.3.9.5. Install the update when Eagle asks for it.

Cameleon: switch a point between front jig and normal jig

Points held by a front jig can now use a normal jig instead with the Use normal jig button, and go back with Use front jig. Default positions on trucks were also improved so more cab points can be reached.

Naja shows where an out-of-tolerance point really is

Select an out-of-tolerance point to see its measured position next to the expected one, with top and side deviation plots. A corner gizmo shows how the 3D view is oriented, and the PDF report now explains what the deviation arrows mean.

Naja corrects frame flex on post lifts

Naja now corrects frame flex on post lifts.

• Body-on-frame vehicles sag at the front and rear overhangs when lifted on posts, which skews height readings.
• Naja estimates this flex from your measurements and subtracts it from the height (Z) values.
• The correction is noted on the report.
• Naja warns you before the report if more overhang points are needed.
• It is on by default and can be turned off in Naja settings.

Naja shows the right save time of saved sessions

When you reload a saved Naja session, the save date and time shown are now correct.

Naja report shows the Naja serial, datasheet file and leveling score

Naja reports now include the serial number of the Naja used, the datasheet file name and the leveling (best-fit) score, so a report can be traced back to its session.

Quick search no longer says "no results" before you type

Quick search no longer shows a "no results" message before you have typed anything.

VIN search finds the right vehicle more often

Search by VIN recognises more vehicles and answers faster, partly by learning from vehicles already matched in past reports. When no exact datasheet exists it now shows the closest matches instead of nothing.

Translations reviewed in all languages

The interface translations were updated in every language, with French wording reviewed and English wording corrected.

Quick search rebuilt and more forgiving

Quick search was rebuilt.

• It tolerates typos and missing hyphens (f250, megone).
• It understands roman numerals and body types in many languages.
• It finds chassis codes from datasheet names.
• Results are better ranked.
• Results show a vehicle picture, body type, drive wheels and wheelbase.

Naja saves automatically

Naja sessions now save in the background after leveling, replacing the Save button (symmetrical mode followed on 29 June).

• The footer shows when the last save happened.
• The Points tab lists leveling points first, then measured, then remaining points.
• The suggested leveling points are spread over the four corners of the vehicle.

Point photos open full screen in every app

In Cameleon, Car Bench, Spanesi, Globaljig and Adapter, click a point photo to enlarge it; the photo panel now also shows the point number and designation.

Report center lists your newest reports first

In menu > Collision center > Report center, the jobs history now lists your most recent reports first.

Reopen past Naja measurements without the device

Opening a saved Naja measurement now goes straight to the results, without leveling again and without a connected Naja. Loaded measurements are read-only, and saving a session updates it instead of creating duplicates.

Steadier Eagle connection and measurements

Eagle's connection and measurements are steadier.

• Eagle keeps up with the measuring head even when the browser tab is in the background.
• Incomplete points are ignored when compensating, so one bad point no longer skews the others.
• The measuring head software moves to RC-1.3.9.3; install the update when Eagle asks for it.

Naja: X, Y and Z distances and larger photos

The Distances menu now shows the X, Y and Z components of each measured distance.

• Point photo thumbnails are larger.
• Socket changes now offer the sockets that fit spherical and conical points.
• The leveling score thresholds and sound were adjusted.

Cameleon DIAG mode offers more points

In DIAG mode Cameleon can now use any point that supports mechanics-in (WI) positioning, so more points are available for diagnosis.

Cameleon pictures of towers, pistons, adaptors and holes

The jig details now show pictures of the tower, piston and adaptor to use and of the exact hole to set them in, making the setup easier to read.

3D Tracking Gauge: skip a measurement

During the guided measurements, a Skip this measurement button lets you pass over a target point you cannot reach (once per target).

CeletteConnect 1.5.1 for Eagle

A new CeletteConnect version is available for Eagle. Eagle asks you to install it when your installed version is older.

Naja: change a point's socket and clearer leveling results

From the point information panel you can now choose a different socket for a point. Leveling results show more precise values, and the measuring step starts automatically once leveling is done.

NajaConnect 0.29 update

A new NajaConnect version updates the certificate Naja uses to connect to Webtools. Naja asks you to install it when your installed version is older.

Naja: clearer leveling points

Points used for leveling are marked with an L badge and their own color.

• Switch a leveling point between WI and WO sockets before measuring.
• Once leveling is done, these points are protected from being re-measured or deleted.
• The top bar was tidied up.

Cameleon side jigs: switch the piston

In the side jig details you can now switch the side jig cross member piston; the rest of the side jig setup is recalculated to match.

Naja symmetrical mode: save and reopen sessions

Symmetrical mode sessions are now saved and listed in the Load window, with a search box.

• Enter the vehicle at the start.
• Delete a symmetrical point from the Points tab or the right-click menu.
• The symmetrical report includes a table of measured distances.

Eagle symmetry mode: delete a single measurement

The Eagle symmetrical measurement workflow was reworked: you can delete one measured point without restarting, and measured values display more reliably.

2D View in the Tram Gauge

For vehicles with 2D body data (door, windshield, trunk and engine bay openings), the Tram Gauge shows a 2D View panel where you enter your measurements against the target values, and the report gets a 2D section. Vehicles are being added one by one.

Naja symmetrical mode: clearer guidance and distance tool

While refining the symmetry plane, a target shows how close you are and the best-fit score is displayed directly. Instructions are clearer and you can now draw distances between points in symmetrical mode.

Cameleon side jigs: forward position for the cross member

The side jig cross member can now be placed forward on the bench, giving more ways to fit side jigs on a vehicle.

Cameleon side jigs: 340 mm height extension

Cameleon can now use the 340 mm height extension on side jigs, shown in the 3D view, the jig details and the PDF drawing.

Naja pre-connection checklist

Before connecting, Naja shows a short checklist: battery charged, Bluetooth on, rail set up, head in reset position, with a link to the tutorial.

Progress bar while a report is generated

Generating a report now shows a progress bar and asks you not to close the page until it is done.

3D Tracking Gauge included with the Tram Gauge subscription

Tram Gauge subscribers now also get the 3D Tracking Gauge: opening Tram Gauge asks which one to use. The 3D version guides you through the measurement order, computes X, Y and Z deviations, has a new report and an optional voice guide.

AI Search available in the vehicle search of every app

The AI Search tab, where you describe the vehicle you are looking for, is now available to everyone in every app, not only in Tram Gauge.

Register your Celette bench in Equipment

In menu > Collision center > Equipment you can now register your Celette bench (Griffon, Rhone, Sevenne, Comet and others) without a serial number.

Comments and photos for each point in reports

Add a comment to each measured point in your reports, and attach point photos to Tram Gauge reports. Reports also fit on fewer pages and photo tables no longer split across pages.

Tram Gauge projected mode: edit stick heights again

In Tram Gauge projected mode you can again adjust the stick heights from the point information panel.

Login page shows the vehicle database size

The login page now shows how many makes and vehicle models the Celette database covers and how many vehicles were added this week.

Cameleon shows when a point needs a round socket

When a point needs a round socket, Cameleon adds S after the tip or adaptor name in the jig panel and on the PDF drawing, so you fit the right socket. The Celette team marks these points in the data.

Cameleon shows jig positions approved by Celette

Jigs placed in a position checked by the Celette team are marked Approved. If you move such a jig, a button puts it back in the approved position.

Cameleon front and rear crash modes use DIAG

In Cameleon, the front crash and rear crash modes now use DIAG points (mechanics in, no Celette screws) on the undamaged half, shown as WO-DIAG and DIAG-WO. Saved configurations were converted to the new modes.

Cameleon: switch side jig and clearer side jig conflicts

A Switch sidejig button lets you change which point uses the side jig, and conflicts between side jigs and other jigs are resolved better.

Eagle: CeletteConnect 1.5.0 update

Eagle now connects to CeletteConnect through a secure connection on your computer, which needs CeletteConnect 1.5.0. Install it when Eagle asks for it; since 18 February the download link always fetches the latest installer.

NajaConnect 0.28 update

A new NajaConnect version renews the certificate Naja uses to connect to Webtools. Naja asks you to install it when your installed version is older.

Redesigned reports with your logo, a QR check and work orders

Reports from Cameleon, Eagle, Naja, the Tram Gauge and the compatible bench apps have a new layout.

• The layout has top and side drawings, clear deviation arrows, point tables and photos, in smaller files.
• Upload your logo in the redesigned menu > Collision center > Account page to print it next to your company name.
• Scan the QR code on a report to confirm on a Celette page who created it and when.
• The job number is now the work order: enter an existing one to pre-fill a follow-up report.
• Every save creates a new report.
• One button downloads all reports of the job.

Globaljig: choose a 4 m, 5 m or 6 m bench

The Globaljig Compatible software now lets you pick your SuperRotax bench length, with a matching 3D bench, so jig positions fit your bench.

Cameleon side jigs fit more point pairs

Cameleon now pairs left and right points on a side jig even when their angles differ slightly, so side jigs are proposed in more cases.

Naja selects the right point when two points overlap

When a symmetrical point sits on top of another point, Naja now selects the one you clicked.

Vehicle sketches drawn correctly in point selectors and Eagle reports

Some vehicle sketches were drawn incorrectly in the point selectors and in Eagle reports. They now display correctly.

Buy Metro 2000 datasheets online

Register your Metro 2000 under menu > Collision center > Equipment to get the Metro 2000 app on your dashboard. Search a vehicle, unlock its Metro 2000 datasheet with an online payment, and find everything you bought in the purchase history.

Tram Gauge hands-free mode

In hands-free mode you take a measurement first, then match it to the right distance, typing values on a numeric keypad or speaking them to the AI assistant. Voice commands can also show or hide point photos and pick a distance by naming its two points.

NajaConnect 0.27 fixes levelling and unstable connections

A new NajaConnect version fixes a levelling bug and connection drops seen on some computers. Webtools prompts you to install it when your installed version is older.

Car Bench point selector works with the new sketches

The point selector of the Car Bench Compatible app works again with the new vehicle sketches, and Cameleon no longer stops with an error when a vehicle's data is incomplete.

Cameleon suggests setups with fewer TV402 parts

When Cameleon chooses the default jig positions for a vehicle, it now favours positions that need fewer TV402 parts.

Find a vehicle from a photo

The vehicle search window has a new Photo Search tab: drop up to 3 photos of the car, or take them with your phone by scanning a QR code, and pick the right vehicle from the suggested matches.

Voice search for vehicles in Tram Gauge

In Tram Gauge, the vehicle search window has an AI search tab: say which vehicle you are working on and pick it from the suggestions.

Quick search shows a picture for more vehicles

When a vehicle has no photo, quick search now shows its body-type silhouette or the datasheet picture instead of an empty space. Search by VIN also tolerates spaces and the letter O typed instead of zero.

Naja report preview shows the vehicle sketch again

The vehicle sketch shows correctly again in the Naja report preview.

Add point photos to your report from your phone

Next to each point's photo upload button in the report there is now a phone button: scan the QR code, take the photo with your phone and it appears in the report on your computer. Available in Cameleon and the Car Bench, Spanesi and Globaljig Compatible apps.

Quick search no longer crashes on the Make filter

Choosing the Make option in the quick search filters no longer makes the search crash.

Read the VIN with your phone camera

In the Search by VIN tab, scan the QR code and take a photo of the VIN with your phone.

• The VIN is read and filled in for you.
• Photos are made smaller before they are sent, so uploads are faster and use less data.
• When you found the vehicle by VIN, the VIN is also filled in automatically in your report.

Globaljig Compatible supports extension 101

Globaljig setup sheets can now use extension 101 when a point needs it, with buttons to raise it or remove it in the jig panel.

Fewer unexpected sign-outs

Fixed a problem that could sign you out of Webtools unexpectedly, and the VIN lookup no longer drops its connection.

Spanesi Compatible supports extension 1317

Spanesi setup sheets can now use piston extension 1317 when a point needs it, shown with its picture in the jig panel and removable with one click.

Clearer default setups in Spanesi and Globaljig Compatible

The suggested jig positions now place each jig as far forward as possible instead of picking one at random, so the same vehicle always gets the same setup. The point selector sketches also line up better with the points.

Webtools works on phones and tablets

Login, the dashboard, the Collision center pages, Cameleon and Tram Gauge now adapt to small screens, with a collapsible top bar and footers that fit on a phone. The Car Bench, Spanesi and Globaljig Compatible apps also got phone-friendly footers.

NajaConnect 0.25 update

A new NajaConnect version renews the certificate Naja uses to connect to Webtools. Webtools prompts you to install it when your installed version is older.

Eagle shows extension lengths in millimetres

The Extensions column in the Eagle points list now shows lengths in millimetres instead of centimetres, matching the other measurements.

Naja full-screen mode and socket drawings

A new button in the Naja footer switches the app to full screen, giving the 3D view the whole screen. The point panel now also shows a small drawing of the socket next to the jig name.

Naja levelling fixes

Restarting the levelling no longer reloads the whole Naja app, and the 3D view no longer over-rotates at the end of levelling. The 3D positioning of Naja was also corrected.

Tram Gauge asks you to confirm unusual measurements

When a measured distance is very different from the expected distance, Tram Gauge now asks you to confirm it. This catches typing mistakes before they end up in your report.

Manage renewal and billing from your Subscriptions page

Manage your renewal and billing from the Subscriptions page.

• Subscriptions now has its own entry under menu > Collision center > Subscriptions.
• Manage Billing opens a secure page to update your payment details.
• Manage Renewal turns off automatic renewal, while your access stays active until the end of the paid period.

NajaConnect 0.24 fixes a levelling issue

A new NajaConnect version fixes a levelling bug in Naja. Webtools prompts you to install it when your installed version is older.

Renew a cancelled subscription without paying twice

If you cancelled a subscription that is still running, the Renew button now simply switches it back on. No new payment is taken and no second subscription is created.

Vehicle photos in quick search history

Your recent quick searches now show the vehicle photo, and hovering over a photo enlarges it, so you can recognise the right vehicle at a glance.

NajaConnect 0.23 update

A new NajaConnect version is available. Naja asks you to install it when your installed version is older.

Tracking Gauge is now called Tram Gauge

The tracking gauge app and its subscription now use the name Tram Gauge everywhere in Webtools.

PDF reports no longer fail without a sketch

When a datasheet has no sketch image, reports now use a default vehicle outline instead of failing to generate.

Cameleon side jig and front gantry fixes

Side jigs now get the right socket diameter whatever the measuring mode, and several front gantry jig placement errors, including on standard crossmembers, are fixed.

Naja point to point: distances table and drawing tool

Point to point mode now lists all your distances in a table, creates a distance automatically as you measure, and has a tool to draw a distance between two measured points with a preview line.

Renew button for inactive subscriptions

On menu > Collision center > Account > Subscriptions, only active subscriptions show Cancel. Subscriptions in any other state, such as a failed payment or an ended plan, now show Renew.

Eagle: guidance for points that need the angle extension

Points that must be measured with the special angle extension are now drawn as rectangles, and their info panel tells you to use that extension. Their target position already includes the extension offset.

Naja: new connection and settings windows

Naja connects more reliably and downloads calibration files more smoothly.

• New windows let you choose or enter the serial number, and reset the serial number or COM port.
• When NajaConnect is missing or outdated, Naja now explains why and offers the update.
• In symmetrical mode, the first point of a pair stays visible in grey as a reference.

Naja: point to point measurement

A new Point to point measurement mode in the Naja start menu lets you measure points with the Naja and read the distances between them.

Naja: change a point's socket for the whole session

In the points tab, click a point's socket to pick another one; the change applies for the rest of the measuring session and changed sockets are shown in orange.

Naja: video tutorials in the start menu

The Naja start menu has a Video tutorials section covering rail assembly, rail setup, head placement and head reset.

Naja: easier to follow at the vehicle

Naja is easier to follow at the vehicle.

• The levelling score is shown on a coloured background you can read from a distance.
• The point info window moves out of the way depending on where the Naja arm is.
• The PDF report now includes a legend for its pictures.
• Cancel in the vehicle selection no longer locks the app.
• Install the NajaConnect update (0.21) when Naja asks for it.

Naja: easier to read from the vehicle

Naja is easier to read from the vehicle.

• Point info shows the index, socket, designation, comment and photos in larger sizes.
• The recommended levelling point stands out more.
• In the PDF report, deviation arrows are bigger and are no longer drawn for points within your custom tolerance.
• Repair is no longer offered for points already in tolerance.
• The serial number prompt can be closed again.

VIN search no longer crashes on a wrong-length VIN

A worldwide VIN search with a VIN that is not exactly 17 characters long now shows a message instead of breaking the search.

Eagle deviations shown with the correct sign

Fixed Eagle showing measured deviations with the opposite sign. Changing a setting no longer brings back points you had hidden.

Naja: aiming guide in symmetrical mode

In symmetrical mode, an aiming reticle and an illustration guide the Naja head to the opposite point. The point panel can now show the distance between any two kinds of points: datasheet, symmetrical and distance points.

Naja: employees can use the manager's Naja

Fixed employees not getting access to the Naja equipment registered by their bodyshop manager.

Naja: smoother Bluetooth pairing

A NajaConnect update speeds up connecting to the Naja and stops it freezing during Bluetooth pairing. Install it when Naja asks for it.

Point photos fixed for jigs holding two points

Fixed the point photos shown for jigs that hold two points in Cameleon, Adapter, Car Bench, Spanesi and Globaljig.

Naja report and saved-job fixes

Saving the Naja PDF report works again, and loading a saved measurement no longer fails when it has no mode. The save button stays disabled until levelling is finished.

Vehicle photos in quick search

Quick search results now show a photo of the vehicle when one is available. Hover over the photo to enlarge it.

Eagle: delete a point's measurement

After compensation, the info panel of a measured point has a button to delete its measurement, after a confirmation, so you can measure it again.

Naja repair mode checks the repair

Repair mode now ends with a check: measure the point again and Naja tells you whether the repair is OK. The rotation and levelling details also open correctly from their button.

Translations updated in all languages

Screens added over the past months, such as the subscription plan descriptions and demo mode messages, are now translated in every language Webtools offers.

Naja: MacPherson points detected with Celette calibration

Fixed NajaConnect not detecting MacPherson points when using a Celette calibration. Install the NajaConnect update when Naja asks for it.

NajaConnect 0.18 certificate update

A new NajaConnect version renews the certificate Naja uses to connect to Webtools. Naja asks you to install it when your installed version is older.

Tram Gauge: type the extension height

In 2D mode you can now type the extension height for one point of a distance, and the extension of the other point is recalculated automatically.

Naja confirms when measurements are saved

A short Saved notification now appears when you save your Naja measurements.

Eagle: choose the extension length per point

In the Eagle points table, one Extensions list (0 to 60 cm) replaces the separate 10 cm and 20 cm boxes. The extension of compensation points cannot be changed.

New typeface across Webtools

Webtools now uses the Source Sans 3 typeface throughout the app.

Cameleon and Naja symmetrical fixes

Fixed the placement of front gantry jigs and the handling of symmetrical points in Cameleon, and the drawing and PDF report in Naja symmetrical mode.

Naja: switch a point between with and without mechanics

Right-click a point you have not measured yet to switch it to its with-mechanics (WI) or without-mechanics (WO) version, when the datasheet has both. It comes with a NajaConnect update (0.17) that Naja asks you to install.

CeletteConnect 1.4.0 for Eagle

A new CeletteConnect version is available for Eagle. Eagle asks you to install it when your installed version is older.

Same vehicle label in every app

The vehicle shown at the top of each app now uses the same layout everywhere and also shows the vehicle version next to the datasheet name.

Search shows only datasheets that fit the app

Quick search, VIN search and search by make or year now hide Cameleon-specific datasheets in the measuring apps and Naja-specific datasheets in Cameleon.

Naja repair mode

Right-click a measured point and choose Repair: attach the Naja probe near the damaged area and watch the deviation update live while you pull. A tutorial step shows how to set up the repair tool.

Naja: symmetrical measurement from the start menu

The Naja start menu now has a Symmetrical measurements (no datasheet) button, so you can start a symmetry check without loading a vehicle.

Eagle symmetrical mode: symmetry score and new report

Eagle symmetrical mode now rates the symmetry of the measured pairs from Excellent to Poor and shows the deviation of the base points. The PDF report has a new drawing, and printing it no longer signs you out.

Cameleon and Adapter: remove a TV.402 plate from a jig

When a jig uses a TV.402 plate, a minus button next to it gives you a position without the plate. Jigs that were dropped when side jigs were added are now put back automatically.

Quick search history shows only brands you can open

The recent searches list in quick search now hides vehicles of brands that are not available in the app you are using.

Naja: NajaConnect update fixes reconnection

A new NajaConnect version fixes reconnection problems between the Naja and Webtools. Naja asks you to install it when your version is outdated.

Order composite jigs from the dashboard

A new Order composite jigs card on the dashboard opens the Celette jig website, where you can order composite jigs.

Naja: start a new diagnostic or load a saved one

When you open Naja you now choose between a new diagnostic and loading a saved one. Measurements are saved to your account, so you can pick up a job later.

Cameleon: front gantry jigs for trucks

For trucks, Cameleon can now place horizontal and vertical jigs on the front gantry. They appear in the jig setup steps and in the drawings.

Cameleon: smarter jig moves along the bench

When you move a jig to another crossmember position, the other jigs on that crossmember are repositioned automatically, and the suggested positions use fewer TV.402 plates.

Reports fixed in Adapter, Spanesi and Globaljig

PDF reports work again in the Adapter, Spanesi and Globaljig apps and in demo mode. Car Bench drawings in demo mode show the floor and top view again.

Clearer plans on the subscription page

Each plan on menu > Collision center > Account > Subscriptions now explains what it includes, with links straight to your shop and billing details pages.

Demo mode fixes

Opening another vehicle in demo mode now shows the subscription offer instead of closing the app, and the Eagle and Naja symmetrical modes no longer crash or sign you out in demo mode.

New Celette logo

Webtools, its PDF reports and drawings now use the updated Celette logo.

CeletteBot assistant in Eagle and Tram Gauge

Eagle and Tram Gauge now include CeletteBot, an AI chat assistant you can ask questions while you work. Its answers can be inaccurate.

Report center lists reports from every app

menu > Collision center > Report center now lists reports from all apps, with a column showing which app produced each one. Reports saved without vehicle details can also be downloaded.

Cameleon unlocks the configuration after a vehicle change

Fixed Cameleon keeping the jig configuration locked after you switched to another vehicle.

Naja tape mode shows expected and measured distance

In tape mode, Naja now shows both the theoretical distance from the datasheet and the distance you measured. Naja also supports the new device calibration while staying compatible with older NajaConnect versions.

Cameleon set-up fixes

Several fixes to Cameleon set-ups: cone 20 socket offset, offsets set to zero, loading saved configurations, and more tower positions allowed on crossmembers.

NajaConnect 0.14 update

A new NajaConnect version is available. Naja asks you to install it when your installed version is older.

Naja: zoom on point photos and clearer serial status

Click a point photo in Naja to see it full screen. The serial button shows the connection status in color and remembers the last serial used, and the popup near a point is bigger.

Car Bench: simpler plate names and safer slide choices

Plate names in the Car Bench parts list are easier to read, and slide choices now respect safety limits and avoid collisions between jig parts. Number markings on Adapter parts are fixed.

Report for Naja symmetrical measurement

Naja symmetrical mode now has its own report and point information panel.

Lock parts while adjusting a jig in Cameleon

When you adjust a jig in Cameleon, you can lock individual settings, such as an adapter length, so they stay as they are while the software recalculates the rest. The Adapter app got the same locks, and locks were fixed in the Car Bench, Spanesi and Globaljig apps.

More reliable Naja connection

Naja connects more reliably, and the serial of your device is passed to NajaConnect automatically.

Adapter app gets Cameleon's point help

In the Adapter app, unavailable points can be shown greyed out, points with missing data are listed, and the "can't find a point" help explains why a point may not appear, as in Cameleon.

Cameleon offsets fixed when loading a saved configuration

Loading a saved Cameleon configuration now restores its offsets correctly. A cone tip selection issue was fixed at the same time.

Better default offsets for trucks in Cameleon

When the vehicle is a truck, Cameleon now starts from default offsets suited to trucks, so you need fewer adjustments before choosing jigs.

NajaConnect 0.10 update

A new NajaConnect version is available. Naja asks you to install it when your installed version is older.

Show password button on login

The login and password reset forms have a Show button so you can check what you typed.

NajaConnect 0.9 update

A new NajaConnect version is available. Naja asks you to install it when your installed version is older.

Naja report with its own layout and point photos

Naja reports now have their own layout, which includes the measured distances, and you can attach photos to the measured points when you prepare a report.

New dashboard with all apps and a demo mode

menu > Dashboard now presents every app.

• It covers Celette apps, the Tram Gauge, Cameleon on other benches and software for other jig systems.
• Click an app to see what it does, a video and its subscription plan.
• Then subscribe, or try it in demo mode.
• Without a subscription you can open every app on a demo datasheet to see how it works.

New Tram Gauge app

Open the new Tram Gauge app from menu > Dashboard.

• Pick two points on the vehicle to get the distance to set on your Tram Gauge, direct or projected.
• Type in what you measure and see the difference.
• Mark undamaged points as intact.
• Save a PDF report.

Dynamic setup sheets for Car Bench, Spanesi and Globaljig

Bodyshops with Car Bench (Muraena, Manta), Spanesi (102, 106) or Globaljig (SuperRotax) jig systems can now use Celette vehicle data: dynamic setup sheets with and without mechanics, showing the parts to use, with drawings and reports. Open them from menu > Dashboard; each has its own subscription and a demo mode.

Use Cameleon jigs on other benches with the Adapter app

The new Adapter app sets up Cameleon jigs through Celette adapters on Car-o-liner, Uniliner, Unoliner, Primacy, Chisum and Doocar benches, with drawings. Open it from menu > Dashboard; it has its own subscription and a demo mode.

Webtools is now Celette AI WebTools

The application is renamed Celette AI WebTools on its pages, login screen and emails. Your account and data do not change.

Clearer Naja leveling and socket change from the point popup

When leveling ends with only normal or low accuracy, Naja asks you to confirm before you start measuring, and the footer shows the best-fit score. The point popup also lets you change the socket.

3D display glitches on Mac fixed

Graphical artifacts in the 3D views on Mac computers are fixed in all apps. Makes in vehicle search are now sorted alphabetically.

Updated terms and conditions and privacy policy

The terms and conditions and the privacy policy were updated. Both are linked at the bottom of every page.

Naja warns when the internet connection is lost

Naja now shows a popup when your internet connection drops, instead of a small online indicator in the top menu. Symmetric and distance measurements can be deleted from the right-click menu and are shown correctly in the report.

Naja measures the distance between two points

In datasheet mode, right-click a point in Naja and choose Measure distance, then measure the second point to get the distance between them.

Subscribe and pay online

Manage your Webtools subscription online from menu > Collision center > Account > Subscriptions.

• Subscribe, renew or cancel, monthly or yearly.
• Pay online in a secure checkout.
• See which makes each product covers.
• Find your invoices under Billing information.
• A free year of subscription is granted for the first equipment you register.

Naja measures symmetrical pairs in datasheet mode

In datasheet mode, right-click a point in Naja to measure it together with its symmetrical point and compare both sides of the vehicle. Install the NajaConnect update (0.8) when Naja asks for it.

Vehicle version shown on drawings and reports

Drawings and reports now show the vehicle version (sub-model) in their title, not only the make and model.

Naja plays a warning sound for out-of-tolerance points

When a point is measured outside tolerance, Naja now plays a distinct sound, so you know without looking at the screen.

Full datasheet names in vehicle search

Datasheet names in search results are no longer cut after a dash, so you can tell similar datasheets apart.

Help when you can't find a point in Cameleon

Cameleon point selection has a "can't find a point" help that explains the usual reasons (no picture, wrong mode, offsets, missing data), and a button to show or hide the points that are unavailable.

Terms and conditions and privacy policy

Webtools now asks you to accept its terms and conditions. The terms and the privacy policy are linked at the bottom of every page.

Vehicle search only offers makes available in your app

When you search a vehicle (quick search, VIN, by make or by year), the list of makes now only shows makes that have data for the app you are using. Search also loads faster.

Cameleon shows unavailable points greyed out

In Cameleon point selection, every point of the datasheet is now listed. Points that cannot be reached with the current mode or offsets are greyed out with a message explaining why, instead of being hidden.

Deviations of 3 mm or less always show green

In Eagle and Naja, a deviation of 3 mm or less now always counts as within tolerance, and the lowest tolerance you can set is 4 mm. The Naja proximity sound also stops once the point has been measured.

Eagle shows every point of the selected mode

Eagle no longer limits the 3D view to vertical and horizontal points: all points of the selected mode are shown.

Naja symmetrical mode: guided leveling and refining

Naja symmetrical measurement now guides you through leveling on a pair of symmetrical points, then refining the symmetry plane with more pairs, and shows the leveling result before you measure. In Naja, right-click a measured point to delete its measurement.

NajaConnect 0.7 update

A new NajaConnect version renews its security certificate and prepares Naja for symmetrical measurement. Naja asks you to install it when your installed version is older.

3D perspective view in Cameleon drawings

Cameleon PDF drawings now include a full-page 3D perspective view of the bench and jigs. The Cameleon report form also shows a summary of the measured points.

New Help & support page with documentation

menu > Collision center > Help & support now opens the Webtools Support page, where you can read and download the documentation. The page also opens without logging in.

Eagle and Naja reports saved to the Report center

Reports made with Eagle, Eagle symmetrical and Naja are now saved to menu > Collision center > Report center, like Cameleon reports, so you can find and download them later. Reports also state which measuring system was used.

Naja leveling details

After leveling, Naja can show the X, Y and Z deviation of each leveling point. The popup shown near a point uses bigger numbers, easier to read from the vehicle.

Naja warns about calibration data and outdated NajaConnect

Naja now warns you about calibration data, NajaConnect updates and the Wi-Fi dongle.

• It tells you whether your device's calibration data was received or is missing (default calibration means lower precision).
• It asks you to update NajaConnect when a newer version exists.
• It warns when no Wi-Fi dongle is found.
• Notifications now appear below the top menu.

Deviation arrows on Eagle and Naja points

In Eagle and Naja, points measured outside tolerance (yellow or red) now show an arrow in the 3D view pointing in the direction of the deviation, so you can see at a glance which way the body is out.

Clearer repair mode names

Repair modes now have plain names next to their codes: DIAG (mechanics in), WI (mechanics in, with Celette screws), BODY (mechanics out), and REAR CRASH / FRONT CRASH for the modes with mechanics in at one end only.

Naja shows when it is searching for the device

While Naja looks for the measuring device, a "Searching Naja" notification is shown and the Naja logo blinks. Measured deviations are also rounded for easier reading.

Eagle and Naja can use the datasheet's own tolerances

A new "Use OEM tolerances" option in the Eagle and Naja measurement settings checks each point against the tolerance set for that point in the Celette datasheet, instead of one tolerance for every point.

CeletteConnect 1.2.0 for Eagle

A new CeletteConnect version is available for Eagle. Eagle asks you to install it when your installed version is older.

Naja connection messages

Naja now tells you what happens while it connects: connecting, Naja found, connected, connection lost or resumed. After an overspeed it asks you to restart the Naja in its start position.

Eagle lists more points in DIAG and BODY modes

In the DIAG and BODY modes, Eagle now also lists the points that are close to horizontal, not only the vertical ones.

Naja measuring system in Webtools

Naja owners can now measure from menu > Naja, once their Naja is registered in menu > Collision center > Equipment.

• Install NajaConnect on the computer to link it to the Naja.
• Guided leveling on four recommended points, or points you choose, with an accuracy result.
• As the probe nears a point, a popup shows live values, with a target and sounds.
• The probe is detected automatically, or can be set in the Naja settings.
• If your shop has several Najas, you choose which one to use.
• Your Naja's calibration file can be downloaded or uploaded from the Naja settings.

Reports show the license plate and tolerance ranges

The report title now includes the vehicle's license plate, and Eagle and Naja reports show in the footer the tolerance ranges behind the green, yellow and red colors. menu > Collision center > Report center now lists 10 jobs per page.

Your account type on the dashboard

The dashboard has a new Bodyshop management section that shows your account type, such as bodyshop manager, employee or Celette distributor.

VAS tile for VAS Cameleon owners

Shops that registered a VAS Cameleon now have a VAS tile on their dashboard. It opens Cameleon with the offsets and documents made for that kit.

Eagle shows deviations in whole millimetres

Eagle now shows measured deviations in whole millimetres, quicker to read. This update comes with CeletteConnect 1.1.7.

More accurate Eagle compensation

Eagle uses a new calculation to place the vehicle from the measured reference points (compensation), for more accurate deviations.

New adaptor combination in Cameleon

Cameleon can now use the AD05 adaptor stacked with two AD120 adaptors.

Delete a measurement in Eagle

In Eagle, in normal and symmetrical measurement, you can now delete the measurement of a point and measure it again.

Side jigs: TV.402 extensions and large vans

Side jigs can now use TV.402 extension plates. On large vans whose side points are far apart, Cameleon now sets up the side jig correctly and shows only the top point.

Smoother Eagle connection

Eagle no longer slows the page down while it is connected, and symmetrical measurement shows the same connection progress bar. This update comes with CeletteConnect 1.1.6.

Eagle shows connection progress

While Eagle connects, a progress bar shows each step: plug in the Wi-Fi dongle, check the connection and power, link the device. It also shows when Webtools checks for an update.

Clearer side jig drawings

On Cameleon side jig drawings, labels no longer overlap, and the crossmember numbers on side jigs are in bold.

Webtools translated into nine more languages

Afrikaans, Arabic, Finnish, Greek, Hindi, Hungarian, Maltese, Swedish and Tagalog showed the English text until now. The interface and emails are now translated into these languages.

Disk jigs for shock absorber points

Cameleon can now use a disk jig on shock absorber points. It appears in the jig setup and on the drawing.

Eagle shows whether it is connected

Eagle shows its connection state more clearly.

• The Eagle head icon shows Disconnected, or a spinner while connecting, instead of a placeholder serial number.
• Eagle opens in DIAG mode when no mode is chosen.
• Eagle asks you to connect it before you pick the point for the head.
• This update comes with CeletteConnect 1.1.2, which Eagle asks you to install.

Cameleon keeps your points when you change bench or crossmembers

When you switch bench or crossmembers, Cameleon now recalculates the jigs for the points you had already selected instead of starting over. Jig collisions are also detected more reliably.

Cameleon points to configurations for another crossmember

When Celette has a default configuration for a different front crossmember type than yours, Cameleon now tells you, so you can change the crossmember type in Settings and reload the page to use it.

Eagle settings for tolerance colors

A new Settings window in Eagle lets you set the yellow and red thresholds and choose how deviations are displayed, and your Eagle reports follow these settings. Points between the two thresholds now show in orange instead of yellow, easier to see.

Webtools in Thai

The Webtools interface and emails are now available in Thai. The French, German, Spanish, Korean and Traditional Chinese translations were extended too.

Eagle measures the distance between two points

In Eagle, select a point and hover over another one: a line joins them in the 3D view and the distance between the two points is shown.

Long Cameleon drawings continue on extra pages

Cameleon drawings now show at most six jig setup boxes per page and continue on the next pages, so large setups stay readable.

Two jigs on one TV.402 plate

Cameleon can now place two jigs on the same TV.402 plate when their points allow it.

CeletteConnect connects Eagle automatically

CeletteConnect, a program you install once on your computer, now links Eagle to Webtools and replaces the manual Eagle setup download.

• Eagle connects automatically over Wi-Fi, in normal and symmetrical measurement.
• As soon as Eagle is connected, Webtools checks for an Eagle software update and installs it.
• Eagle asks you to download CeletteConnect, or a newer version of it, when needed.

Email reminders before your subscription ends

Webtools now emails you 30 days and 7 days before your subscription ends, and on the day it ends, with a link to log in and renew.

More default configurations in Cameleon

When Celette has no default configuration for your exact bench, Cameleon now loads one made for a shorter bench. In the Load configuration list, dates and times follow the format of your language.

Quick search remembers your recent vehicles

The quick search has a new See History button that lists the vehicles you searched recently on this computer, so you can open one again in one click.

Language button easier to find

The language button is now bigger and in color, in the top bar and on the login page, and your name stands out more in the top bar.

Cameleon shows the photo of the symmetrical point

When a datasheet point has no photo, Cameleon now shows the photo of the same point on the other side of the vehicle, mirrored, to help you find it.

Reports mark a point OK within 3 mm

In Cameleon reports, a point within 3 mm of its datasheet position is now marked OK. VB diameter and pitch are no longer required when you fill in a point.

Pay by wire transfer

When you buy a subscription you can now choose Wire transfer: Webtools shows the bank details for your currency, you upload your proof of transfer, and the subscription starts as soon as Celette validates the transfer.

Eagle symmetrical measurements without a datasheet

Eagle can now check a vehicle that has no datasheet by measuring matching points on both sides: choose Symmetrical measurements (no datasheet) when you select the vehicle. The results go into an Eagle report.

Add a missing point in Cameleon

If a point you need is not in the datasheet, the + button in the points list lets you add it: describe the jig you built, Cameleon places it in 3D, and you submit the point for validation by the Celette team. Until then the point stays available on your datasheet.

Reports cover horizontal and angle jigs

Cameleon reports now include horizontal and angle jigs, not only vertical ones. For each point, enter the jig setup you used, with the tower and plate angles, and Webtools calculates how far the point has moved; answer Yes if the point was correct.

Eagle report fixes

The Eagle report now downloads correctly, shows the country name instead of a number, and can be created before your shop details are filled in.

Free year of subscription for Eagle

A free year of subscription is granted for the first equipment registered, and Eagle now counts as well as Cameleon.

Cameleon fixes and new side jig drawings

Fixes and additions to Cameleon in October.

• A saved configuration that no longer fits the datasheet is rebuilt automatically, with a message, instead of failing to load.
• The logout button works again and stays visible after login.
• New side jig drawings for setups with a reversed SP050.
• Pictures for the alternative type C side jig.

Eagle software updates and connection status

When the Eagle head runs an older software version, or is still not connected after two minutes, Webtools offers to download the Eagle installer. Eagle also shows whether you are online, and lists only the modes it supports (DIAG and WO).

Eagle in Webtools

Eagle owners can now measure with Webtools: register your Eagle in menu > Collision center > Equipment, then open menu > Eagle.

• Choose the vehicle and mode to see the datasheet points in 3D, with the vehicle sketches.
• Webtools connects to the Eagle head, shows where to attach it and guides the calibration.
• Measured points are compared with the datasheet, and you can save your measurements and load them again.
• Point details show the photo and the socket to use.
• Print an Eagle report.
• A Maintenance tab tests the head: encoders, communication, button and distance.
• No Cameleon needed.

Side jigs: MZ600-1 tower and photos for both points

Side jigs can now use the MZ600-1 tower (from 2 September). Double jigs and side jigs show a photo for each of their two points.

Quick search understands hyphens, dots and slashes

Model names that contain a hyphen, dot, slash or plus sign, such as CX-5, are now searched as you type them.

Cameleon jig, drawing and report improvements

Several Cameleon improvements landed in August.

• The drawing lists the jig boxes from front to rear.
• The side jig 3D view shows the lock sticks.
• Screw details are shown for more jigs.
• Double horizontal jigs were reworked.
• Reports and drawings no longer print an empty serial number or subscription date in the footer.
• Reports show the customer's country name correctly.

Video tutorials for side jigs and reports

Video tutorials now also explain how to build side jigs and their scaffolding, and how to measure a point for a report.

Side jigs for wider vehicles

Side jigs can now reach wider vehicles with extra pistons and a new plate, shown in the jig panel and on the drawing. Chassis jigs now also appear in the drawing's parts list.

VIN search outside North America

Search by VIN now also works for vehicles outside North America, such as European VINs. The VIN you found is filled in automatically when you create a report.

Pay with PayPal

Subscriptions can now be paid with PayPal as well as by card.

Video tutorials for building jigs

The "How to build this jig?" links in the jig panel now play video tutorials for vertical, horizontal and angle jigs.

Cameleon tells you when a point is beyond the bench

When a jig cannot be placed because its point is too far from the bench, Cameleon now says so and suggests changing the offsets.

Clearer drawings and side jig panel

Drawings and the side jig panel were reworked in June.

• Bigger text and numbers on the drawing, with X, Y and Z axis arrows.
• The side jig panel was redesigned, with new pictures and the values that were missing.
• The side jig drawing follows the same layout, with accurate values and the tower names.
• Chassis jigs now also work on horizontal points.
• Points stay inside the default vehicle sketch in the points list.

Search by VIN

A new Search by VIN tab in the vehicle search finds the vehicle from its VIN, starting with North American vehicles.

Chassis jigs for body-on-frame vehicles

On vehicles built on a separate frame, such as many pickups, Cameleon can now hold frame points with chassis jigs, using short or long chassis towers and pistons. The jig panel and the drawing show how to build them.

Cameleon offsets window and better layout

Cameleon got a new offsets window and a cleaner layout in May.

• Offsets open in a window where you choose custom offsets, dedicated offsets (to use with dedicated jigs, no adjustment) or custom dedicated offsets.
• FB1 jigs show which axis, A or B, to use, also on double jigs.
• Cameleon fits smaller screens better, with clearer buttons.

Emails, drawings and reports in your language

Webtools now remembers the language you choose and, on your first visit, starts in your browser's language. Emails, printed drawings and reports now come in your language too, with fonts for every alphabet.

Vehicle documents in Cameleon

When the vehicle you choose comes with extra documents, Cameleon opens them as PDF, and a blinking Documents button in the footer shows them again.

Webtools in 33 languages

Webtools is now available in 33 languages. Choose yours with the language button at the top of the screen, or on the login page.

Angle jigs switch between AXE 60 and ANC 90

In the jig panel, an angle jig can now be switched between an AXE 60 and an ANC 90 build with one button. Default height offsets are calculated more accurately, and double jigs now work on rear points.

New employee accounts confirm their email

Employee accounts created by a manager in menu > Collision center > Account now receive an email to confirm their address.

Cameleon jig panel and drawing improvements

The Cameleon jig panel and drawings were improved in early March.

• Redesigned panels for double jigs and simple horizontal jigs.
• Colored rulers on the side jig crossmember in the 3D view.
• Drawings show the bolt information for each jig.
• The mode button shows the picture of the mode you chose, and report and drawing file names include it.
• Values are rounded the same way on screen and on the drawing.
• When you add jigs, Cameleon avoids TV402 extensions where it can.

Clearer sign-up emails and login page

Account confirmation and password reset emails now look like Webtools, and new pages confirm when an email was sent or your password was changed. The login page also links to Cameleon v1 for users of the previous Cameleon software.

Pay your subscription online by card

Subscriptions for your registered equipment can now be paid online by card.

Cameleon keeps your jigs when you change the offsets

Changing the offsets now keeps the jigs you had set up instead of starting over. DIAG mode also covers angled cradle points, pilot holes and side jig points.

Webtools goes live

Webtools opened to bodyshops on 28 January 2022, bringing the Cameleon jig software online.

• Find a vehicle with quick search, or by make or by year.
• Cameleon sets up your jigs on the bench in 3D for the repair mode you choose (DIAG, WI, WO, WIO or WOI), with vertical, horizontal, angle, double and side jigs.
• When a jig is missing data, enter your own measurements; save your bench configurations and load them again later.
• Print the jig drawing with the list of parts to use.
• Create diagnostic, before-repair and after-repair reports with photos, kept in menu > Collision center > Report center.
• Register your Cameleon in menu > Collision center > Equipment: a free year of subscription is granted for the first equipment you register.
• Manage your shop, billing details and employee accounts in menu > Collision center > Account, with a reminder 6 weeks before your subscription ends.
• Use Webtools in English, French or Spanish, with a mouse or on a touch screen.